Protocol Training
HBM4 training
An HBM4 training course typically covers the fundamentals of DRAM, HBM architecture, and HBM4-specific features, including signal descriptions, channel architecture, and error handling, aiming to…
- 15 HoursCourse Duration
- 85 SessionsRecorded & Live
- 4.6/5Learner Rating
- 5000+Enrolled Learners
Course Overview
About Course
An HBM4 training course typically covers the fundamentals of DRAM, HBM architecture, and HBM4-specific features, including signal descriptions, channel architecture, and error handling, aiming to equip engineers with the knowledge for designing and validating systems using HBM4 technology.
Detailed Syllabus
11 modules- Channel Definition
- Channel Addressing
- Simplified State Diagram
- HBM3 Power-up and Initialization Sequence
- Controlled Power-off Sequence
- Initialization Sequence with Stable Power
- Initialization Sequence for Use of IEEE 1500 Instruction Including Lane Repairs and Channel Disable
- MR0 to MR15
- Master boot record sector
- Partition table
- Partition table entry
- HBM3 Clocking Overview
- WDQS-to-CK Alignment Training
- HBM3 Data Bus Inversion (DBIac)
- Data Bus Inversion (DBIac)
- Internal DBIac State with Read Commands
- Command Truth Tables
- Row Commands
- Row No Operation (RNOP) Command
- ACTIVATE (ACT) Command
- PRECHARGE (PREpb) and PRECHARGE ALL (PREab) Commands
- Rounding Rules for Row Access Timings
- REFRESH Command (REFab)
- PER-BANK REFRESH Command (REFpb)
- Refresh Management (RFM)
- Adaptive Refresh Management (ARFM)
- Column Commands
- Column No Operation (CNOP)
- Read Command (RD, RDA)
- Write Command (WR, WRA)
- Mode Register Set (MRS) Command
- Power-Mode Commands
- Power-Down (PDE, PDX)
- Self Refresh (SRE, SRX)
- Parity
- Command/Address Parity
- Data Parity
- Clock Frequency Change Sequence
- Temperature Compensated Refresh Reporting
- Temperature Compensated Refresh Trip Points
- Catastrophic Temperature Sensor
- Interconnect Redundancy Remapping
- AWORD Remapping
- Row Command Bus – Remapping Table
- Column Command Bus – Remapping Table
- AWORD Remapping Examples
- DWORD Remapping
- DWORD Remapping Table
- DWORD Remapping Example
- HBM3 Loopback Test Modes
- HBM3 Polynomial Structure
- AWORD MISR Polynomial
- DWORD MISR Polynomial
- General Loopback Modes Features and Behavior
- AWORD and DWORD Write MISR Modes
- Test Method for AWORD (Write) MISR Mode
- Test Method for DWORD Write MISR Mode
- AWORD and DWORD Write Register Modes
- Test Method for AWORD (Write) Register Mode
- Test Method for DWORD Write Register Mode
- DWORD Read Register Mode
- Test Method for DWORD Read Register Mode
- DWORD LFSR Mode (Read direction)
- Test Method for DWORD LFSR Mode (Read direction)
- AWORD and DWORD Write LFSR Compare Modes
- Test method for AWORD (Write) LFSR Compare Mode
- Test Method for DWORD Write LFSR Compare mode
- On-die DRAM ECC
- ECC Overview
- HBM3 On-die ECC Requirements
- DRAM Fault Isolation Requirements
- Error Check and Scrub (ECS)
- On-die ECC Transparency Protocol
- ECC Engine Test Mode
- WOSC
- WDQS Interval Oscillator
- tWDQS2DQ_I Offset due to Temperature and Voltage Variation
- DCA and DCM
- Duty Cycle Adjuster (DCA)
- Duty Cycle Monitor (DCM)
- Self Repair
- Absolute Maximum DC Rating
- Recommended DC Operating Condition
- Operating Temperature
- Leakage Current
- Capacitance
- DQ Rx Voltage and Timing
- AWORD Signaling
- CK and WDQS Input Signaling
- Midstack Signaling
- Transmit Driver Currents
- Output Timing Reference Load
- Output Voltage Level
- Output Rise and Fall Time
- Overshoot/Undershoot
- IDD and IPP Specification Parameters and Test Conditions
- IDD and IPP Specifications
- IDD6 Specification
- Signals
- MicroBump Positions
- HBM3 Stack Height
- HBM3 Bump Map
- Direct Access (DA) Test Port
- DA Test Port Lockout
- IEEE Standard 1500
- Interaction Between DA Test Port and IEEE1500 Test Access Port
- IEEE1500 Test Access Port I/O Signals
- IEEE1500 Test Access Port Functional Description
- Wrapper Data Register (WDR) Types
- Read Only (R) Wrapper Data Registers
- Write Only (W) Wrapper Data Registers
- Read and Write (R/W) Wrapper Data Registers
- WDR Reset State
- IEEE1500 Test Access Port Instruction Encodings
- Test Instructions
- BYPASS
- EXTEST_RX and EXTEST_TX
- HBM_RESET
- MBIST
- SOFT_REPAIR
- HARD_REPAIR
- DWORD_MISR
- AWORD_MISR
- CHANNEL_ID
- AWORD_MISR_CONFIG
- DEVICE_ID
- TEMPERATURE
- MODE_REGISTER_DUMP_SET
- READ_LFSR_COMPARE_STICKY
- SOFT_LANE_REPAIR and HARD_LANE_REPAIR
- CHANNEL_DISABLE
- CHANNEL TEMPERATURE
- WOSC_RUN and WOSC_COUNT
- ECS Error Log
- HS_REP_CAP
- SELF_REP and SELF_REP_RESULTS
- Interaction with Mission Mode Operation
- IEEE1500 Test Port AC Timing Parameters
- Boundary Scan
Session-wise Content
85 sessions · 17h 37m- 1DDR significance in SOC, memory categories, SRAM versus DRAM, DRAM cell array1h 25m
- 2DDR memory organization1h 12m
- 3Rank, Channel, SIMM, DIMM, DDR evolution25m
- 4DDR evolution23m
- 5DDR frequently used terms15m
- 6DDR wrapper architecture15m
- 7DDR wrapper signals35m
- 8Interleaved and sequential access13m
- 9Need for HBM25m
- 10HBM features12m
- 11HBM evolution14m
- 12HBM Memory Organization15m
- 13Pseudo channels7m
- 14IO Signal description12m
- 15Microbump positions14m
- 16How HBM differs from DDR6m
- 17HBM channel addressing, Bank groups16m
- 18Channel Addressing example23m
- 19HBM4 channel addressing updates10m
- 20HBM4 bank group updates2m
- 21HBM4 IO signal description updates4m
- 22HBM4 DRAM organization updates5m
- 23HBM State diagram5m
- 24HBM Initialization7m
- 25Power on and controlled power off sequence2m
- 26HBM mode register summary7m
- 27Mode register fields13m
- 28HBM4 mode register updates10m
- 29Clocking overview14m
- 30WDQS to CK Alignment11m
- 31Data bus inversion17m
- 32Commands truth table11m
- 33commands RNOP Activate13m
- 34Precharge20m
- 35Refresh24m
- 36DRFM - Directed refresh management18m
- 37Refresh management15m
- 38Column commands : READ22m
- 39Column commands : WRITE14m
- 40Column commands : MRS4m
- 41Commands: PDE, PDX10m
- 42Commands: SRE, SRX8m
- 43HBM-Parity17m
- 44Clock frequency change sequence
- 45Interconnect redundancy remapping : DWORD remapping5m
- 45Temperature Compensated refresh reporting3m
- 46Interconnect redundancy remapping: AWORD remapping13m
- 48Interconnect redundancy remapping: WSO remapping9m
- 49Direct access test port5m
- 50IEEE Standard 150034m
- 51Wrapper data register types8m
- 52WIR test instruction encodings11m
- 53IEEE150 Bypass Extest rx tx12m
- 54IEEE1500 ses5 HBM Reset5m
- 55IEEE1500 MBIST3m
- 56IEEE1500 soft repair11m
- 57IEEE1500 hard repair3m
- 58IEEE1500 DWORD MISR6m
- 59IEEE1500 AWORD MISR5m
- 60IEEE1500DEVICE ID, CHANNEL ID9m
- 61IEEE1500 TEMPARATURE READ, LFSR COMPARE STICKY7m
- 62IEEE1500 soft lane,hard lane repair8m
- 63IEEE1500 channel disable and channel temparature6m
- 64IEEE1500 WOSC RUN and WOSC COUNT3m
- 65IEEE1500 ECS Error log5m
- 66IEEE1500 HS REP CAP5m
- 67IEEE1500 SELF REP and SELF REP RESULTS5m
- 68IEEE1500 interaction with mission mode operation2m
- 69OnDie DRAM ECC9m
- 70DRAM fault isolation3m
- 71ECC engine test mode7m
- 72ECC transparency protocol9m
- 73ECC Engine testmode12m
- 74WDQS Interval Oscillator13m
- 75DCA, DCM12m
- 76Loopback test modes13m
- 77Loopback modes features - Entering and exiting AWORD and DWORD MISR mode8m
- 78AWORD and DWORD MISR mode - General features3m
- 79AWORD and DWORD write parity checking, preset state for MISR registers8m
- 80Loopback test modes: Summary12m
- 81AWORD and DWORD Write MISR Modes7m
- 82AWORD and DWORD Write register Modes10m
- 83Test method for DWORD LFSR mode (Read direction)18m
- 84Self repair16m
- 85Self repair flow chart4m
Your Instructor
S
Sreenivas Reddy
Founder, VLSIGuru
Benefits of eLearning?
- Access to the Instructor - Ask questions to the Instructor who taught the course
- Available 24/7 - VLSIGuru eLearning courses are available when and where you need them
- Learn at Your Pace - VLSIGuru eLearning courses are self-paced, so you can proceed when you're ready
What Our Students Say
Frequently Asked Questions
- Course presentations for all topics
- Session notes
- Lab documents with detailed steps
- User guides
Course does not have any pre-requisites. However any exposure to Digital design, VLSI design flow is an added advantage.
- Each session of course is recorded, missed session videos will be shared
- Yes, You will have option to view the recorded videos of course for the sessions missed
- You will have option to repeat the course any time in next 1 year
- Yes, Course fee also includes support for doubt clarification sessions even after course completion
- You have option to mail you queries
- Option to meet in person to clarify doubts